DITEC: Water-for-Injection Production -

DITEC: Water-for-Injection Production

Description
Specification
Other

Multiple-effect distillers, or DITEC, are daily employed for Water for Injection production.

DITEC is built with the simplest piping structure possible. This simplified and efficient design aims to reduce energy consumption and to contain microbiological contamination.

Multiple-effect distillers have several consolidated features that make them perfectly efficient and easily applicable in pharma and biotech processes, such as the integral pre-heating coil, which allows an easier design and high thermal efficiency. The falling film feed system with an instantaneous flash evaporation effect to improve evaporation efficiency. The possibility to produce pure steam at first-effect in alternation or while producing CS. The availability to supply automation and control system, mostly based on industrial PLC/HMI interface.

DITEC 6.000/6 is designed and manufactured with six effects, operating capacity 5.000 l/h at 90° with industrial steam at 6 barg. The system is built and wired on skid, equipped with its own control system, all this makes it a stand-alone WFI controllable unit and fully testable during FAT.

It consists of six columns made of AISI 316 L stainless steel, rock wool thermal insulation; high pressure multistage pump; 200L feed tank; two heat exchangers DTS type; valves and sensors; cooling system.

The control system is based on PLC/HMI solution, with one remote I/O module. The HMI interface allows to supervision system status, manage and monitor automatic production, manage multiple user accounts/groups, monitor and manage alarms, view real-time and stored data and more.

Integral pre-heating coil, a new design due to lengthy research and experience
Falling film feed system with an instantaneous flash evaporation effect to improve evaporation efficiency
Water droplet separation based on a combination of multiple physical factors
Pure steam production at first effect in alternation, or while producing CS
Automation and control: the system is controlled by industrial PLC based on HMI interface

WFI Production Capacity (l/h) *
DITEC Models	with Plant Steam @ 8 bar	with Plant Steam @ 6 bar	with Plant Steam @ 3 bar
250	250	200	130
500	500	400	280
750	750	670	400
1000	1000	830	530
1500	1500	1250	800
2000	2000	1600	1100
3000	3000	2500	1650
4000	4000	3300	2200
5000	5000	4150	2720
6000	6000	5000	3720

Dimensions and Weight ** Width x Depth x Height
DITEC Models	4 effects	5 effects	6 effects	7 effects	8 effects
250	1400 x 1000 x 2600 mm 750 kg
500	1650 x 1100 x 2600 mm 860 kg	2200 x 1100 x 2600 mm 1000 kg
750	2000 x 1200 x 2900 mm 1000 kg	2500 x 1200 x 2900 mm 1200 kg	3000 x 1200 x 2900 mm1400 kg
1000	2500 x 1400 x 3300 mm 1200 kg	2800 x 1400 x 3300 mm 1400 kg	3200 x 1400 x 3300 mm 1600 kg
1500	3000 x 1500 x 3600 mm 1500 kg	3300 x 1500 x 3600 mm 1800 kg	3600 x 1500 x 3600 mm 2000 kg
2000	2550 x 1500 x 4200 mm 1900 kg	3300 x 1500 x 4200 mm 2300 kg	3600 x 1500 x 4200 mm 2800 kg
3000		3300 x 1500 x 4200 mm 2700 kg	3600 x 1500 x 4200 mm 3400 kg	4400 x 1500 x 4200 mm 4000 kg
4000		3500 x 1600 x 4400 mm 3000 kg	4150 x 1600 x 4400 mm 4000 kg	4800 x 1600 x 4400 mm 5000 kg	5450 x 1600 x 4400 mm 6000 kg
5000			4500 x 1700 x 4400 mm 5000 kg	5200 x 1700 x 4400 mm 6000 kg	5900 x 1700 x 4400 mm 7000 kg
6000			5300 x 1700 x 4400 mm 6000 kg	5900 x 1700 x 4400 mm 7000 kg	6500 x 1700 x 4400 mm 8000 kg

*The above data has a tolerance of ± 5%.

** Maximum dimensions.

PDF Downloads

DITEC: Water-for-Injection Production

Enter a description